Custom Drapery

Custom Drapery in New Palestine, IN

Pleated panels sized by yardage, rods set above the opening

Call (317) 854-7158Get Free Quote
Quick Answer

If you're deciding whether this is the right product for a particular room, these answers should settle it. Where it isn't the right choice, the questions below say so and point at what is.

  • Service: Custom Drapery for New Palestine homeowners
  • Service area: New Palestine, IN and surrounding areas
    • The measure is bookable soon. Fabrication is the fixed cost in time, generally two to five weeks and longer on specialty shapes. If you have a date you're working toward, tell us at the measure and we'll be straight about it.
  • Insured and bonded
  • Serving New Palestine, IN since 2008
Custom Drapery Services

Expert Custom Drapery for New Palestine Homes

Drapery is what a room reaches for when the window is already fine and the space needs softening. New Palestine's median home value of $357,500 runs 1.23 times the Indianapolis metro median of $291,400, and its median household income of $96,923 runs 1.21 times the metro figure. The houses behind those numbers are the larger post-2000 plans with two story great rooms and 18 to 28 openings, plus the semi custom houses out on the section roads. Those rooms have height, hard surfaces and very little applied trim. A pair of drapery panels on a rod set above the opening gives the wall a vertical line the drywall return never provided.

Yardage and dye lot are the two facts that decide whether you are happy in three years. Fullness is a multiplier on the width of the opening, and a panel made at two and a half times looks generous where the same fabric at one and a half looks stingy, so the honest comparison between quotes is yardage rather than price per panel. Fabric is dyed in runs, so a third panel ordered next year for the same wall will not match exactly. Panels also drop after hanging as the fabric relaxes, which is why we hem on site rather than at the factory, and why the two story great rooms in the 483 houses built here from 2000 to 2019 need the longest settling time.

When to Call

Signs You Need Custom Drapery

If you notice any of these in your New Palestine home, it is worth booking a measure. None of it is urgent, and none of it fixes itself either.

New panels won't clear the shade cassette behind them

Panels hang over a register and have discolored

Hems break unevenly across one wall

Cooking smells have settled into the living room panels

Panels hang stiff with a crease in the wrong place

A bedroom needs softness that a shade alone can't give

Open panels cover a third of the glass

The rod has bowed in the middle under the weight

Voices carry and ring in a room with bare glass

The fabric you loved has been discontinued since

Our Process

How New Palestine Window Treatments Handles Custom Drapery

Every job follows the same five-step process. Transparent, thorough, and done right the first time.

1

Rod height and width set

2

Fullness chosen against the fabric

3

Widths per panel calculated

4

Rod projection checked against the shade

5

Stationary or drawing panels decided

Real Project Photos

Custom Drapery in New Palestine

Photographs from real custom drapery jobs completed by our crew in New Palestine and surrounding areas.

Custom shades measured and installed in New PalestinePlantation shutters fitted to a New Palestine windowCellular shades in a New Palestine living room
Scope of Work

What Custom Drapery Includes

Every New Palestine job is documented item by item. Here is what the crew covers.

Rod height and rod width set first, since where the hardware goes decides how the room reads

Finished length measured from the ring or hook down to the floor, at both ends and the center

Floor checked for level across the opening, because an out-of-level floor shows in the hem

Fullness chosen against the fabric and the look, commonly between two and two and a half times the rod width

Widths per panel calculated from fullness, fabric width and the seam allowance, then written on the order

Pattern repeat measured and yardage figured so motifs land at the same height on every panel

Pleat style specified per room, with a sample photo attached to the order so nothing is assumed

Buckram weight selected so the heading stands up instead of collapsing over the rings

Lining specified per elevation, plain, blackout or none, and stated in writing

Interlining added where the fabric needs body or where the room wants weight and quiet

Return depth and overlap at the center dimensioned so panels close without a gap down the middle

Stack back allowed for on the wall so open panels clear the glass instead of covering it

Rod, rings, brackets and finials selected as one set with the panel weight in mind

Mounting substrate found before install day so brackets land in framing or in an anchor rated for the load

Extra brackets added on long rods so the rod can't bow under a full set of lined panels

Hems weighted and corners squared so panels hang straight rather than kicking out

Panels steamed on site to drop fabric memory from folding and shipping

Panels dressed and tied for a few days so the folds train and each panel breaks the same way

Pricing

What Custom Drapery Costs in New Palestine

Published national figures for custom drapery run roughly $300 to $4,000 per window. That's a national range for the category, not a quote for anything in New Palestine, and drapery has the widest spread of anything we sell for a reason. Fabric is the largest single variable and it's priced by the yard, so fullness and panel count multiply whatever you choose. A large pattern repeat adds yardage before a single panel is cut. After fabric it's construction: lining, interlining, pleat style and hand finishing. Then hardware, which on a long span with heavy panels stops being decorative and starts being structural. Two windows of the same size in Hancock County can land at opposite ends of that range purely on cloth.

By Product

How Custom Drapery Differs by Product

Every product in this trade behaves differently in a room. Here is what that means for this work.

Pinch pleat: The traditional three-finger heading, hand-tacked and stiffened with buckram. It carries formal fabrics well and holds a deep, consistent fold. Specify it in dining rooms and primary bedrooms where the drapery is meant to look tailored.

Euro pleat: A two-finger pleat tacked at the top of the heading rather than the bottom, so the fold opens as it falls. It reads cleaner and more current than a pinch pleat while keeping the same structure behind it.

Goblet pleat: A rounded, stuffed pleat that stands proud of the heading. It's a decorative choice for tall rooms with real ceiling height, and it wants a fabric with enough body to hold the shape without slumping.

Ripplefold: Snap carriers on a track hold the fabric in a continuous S-wave with no pleats at all. It stacks tightly, it draws easily on wide spans, and it's the heading we reach for on a modern room or a long wall of glass.

Flat panel and rod pocket: The simplest headings. A flat panel on rings suits a stationary decorative panel, and a rod pocket suits a light fabric on a rod nobody plans to draw. Neither is built for daily operation.

Cotton sateen lining: The standard lining. It protects the face fabric from sun, gives the panel body so it hangs straight, and presents a consistent white or ivory face to the street from every window in the house.

Blackout lining: A dense multi-layer lining that stops light through the cloth. It adds real weight, which the rod and brackets have to carry, and it makes a bedroom noticeably darker even though light still comes around the panel edges.

Interlining: A soft flannel layer sewn between face fabric and lining. It adds drape, softens the fold, quiets the room a little and helps at a cold window in January. It's the difference between a nice panel and a luxurious one.

Decorative rod with rings: A visible rod, rings and finials, drawn by hand or with a baton. It puts the hardware into the design of the room. Panel weight decides diameter, material and how many brackets the span needs.

Traverse rod: A mechanical rod with carriers and a cord or baton draw, often concealed behind a heading or a valance. It's what you want when panels get closed every night and the hardware is meant to disappear.

Common Questions

Custom Drapery FAQ

Questions we hear most often from New Palestine homeowners considering custom drapery.

Two to two and a half times the width it covers for a pleated panel, and less than that reads flat the moment it is closed. Fullness is where drapery cost lives, because you are buying yardage rather than labor, and two quotes at very different prices are usually two different fullness numbers rather than two different skill levels. Ask for the yardage on any quote you compare. In a two story great room in a post-2000 New Palestine plan, the panels are tall as well as wide, so a change in fullness moves the total more than it would on a bedroom window.
Above the opening and wider than it, which is a decision about the wall rather than the window. In the 53.2 percent of this town's housing built since 2000 there is no casing to anchor to, so the brackets fasten into the wall and we locate solid backing before we set the height. Mounting the rod near the ceiling and running it four to eight inches past each side lets the panels stack off the glass when open, so you keep the daylight. It also makes the opening read taller, which is the main reason people like the look.
That is the usual arrangement here and it works well. A solar shade or a cellular shade does the light and heat work, and the panels handle the look and the evening privacy. It also solves the problem solar shades have after dark, when the room is brighter than the yard and the fabric becomes close to transparent from a section road like 400 South. The practical detail is projection: the rod has to stand far enough off the wall that the panels clear the shade's headrail or cassette. We measure that at the same visit rather than discovering it at install.
Close, and not exactly, and on the same wall you will see it. Fabric is dyed in lots and the lots differ slightly in tone, which is invisible across a hallway and obvious side by side in daylight. Sun exposure widens the gap: a panel that has spent two summers on a west facing wall on the Boulder Creek side of town has already lightened, and NFRC attributes 40 to 60 percent of fading to ultraviolet with the balance from visible light and heat. Order a room in one go, and keep any leftover yardage rather than discarding it.
A lined panel does something, and less than a product built for it. Heavy fabric with an interlining slows air movement at the glass on a January morning at an average low of 20.9 degrees, particularly if the panels return to the wall at each end and overlap in the middle so the air behind them is enclosed. What it will not do is match a cellular shade, which DOE and Oak Ridge testing credits with up to 20 percent of heating energy saved against a bare window. Where winter comfort is the goal we put cellular behind the panels.
National ranges run roughly $300 to $4,000 per window for drapery, which is the widest band in this trade because a simple lined panel and a hand pleated interlined treatment on a two story window are barely the same product. No installed pricing is published for New Palestine or anywhere in Hancock County, so we quote against national figures until we have your measurements and your fabric. The Indiana Home Improvement Contract Act requires a written contract with scope and total price on residential work over $150, and drapery is where that written yardage matters most.
Fullness is how much fabric goes across the rod compared with the rod's width. At two times fullness, a 100 inch rod carries about 200 inches of cloth. Most of our work lands between two and two and a half times, because that's where a panel looks full rather than skimpy and still stacks reasonably. Sheers often want more, since thin fabric needs the extra to read as fabric at all. Below two times, panels look flat when closed, and no fabric choice rescues that.
A width is one full cut of the fabric across the bolt, usually around 54 inches before seams. Panels are built by joining widths until you reach the fullness the rod needs. So a pair on a wide opening might be two widths per side, or three, and that number is what drives yardage and cost more than anything else. We write widths per panel on the order rather than leaving it as a vague description, so there's no argument later about how full "full" was.
Because the motif has to land at the same height on every panel, and to make that happen the cutter starts each panel at the same point in the repeat. Everything between panels gets trimmed off. A large repeat can add a meaningful chunk of yardage before anyone sews. This isn't waste in the careless sense, it's the cost of a room where the pattern lines up across four windows. We calculate it during the quote so the number doesn't appear later.
Buckram is the stiffener sewn into the top of the panel behind the pleats. It's what makes a heading stand upright and hold a crisp fold instead of flopping over the rings. Weight matters: too light and a heavy fabric drags the heading into a slump, too heavy and a light fabric looks boardy. It's invisible in the finished panel, which is exactly why it gets skipped in cheap work, and why a bargain drapery panel never quite looks right.
Almost always, and how they touch is the decision. A kiss break has the hem just meeting the floor and is the cleanest look for panels that get drawn every day. A slight break, half an inch to an inch of extra length, lets the fabric relax onto the floor and looks softer. A puddle is several inches and belongs on stationary panels in a formal room, not on anything you'll walk past. Floors are rarely level, so we measure the length at three points.
The return is the short section that wraps from the front of the rod back to the wall at each end, closing off the side. The overlap is where the two leading edges cross in the middle when the panels are shut. Skip either one and you get a stripe of light and a sightline into the room. Both need dimensioning at the measure, because the return depth depends on your bracket projection and the overlap depends on the hardware.
In something that will hold the load. A pair of interlined blackout panels on a wide rod is heavy, and it hangs off the wall on a lever arm, which multiplies the pull on the fasteners. We find framing where we can, use blocking where it exists, and use anchors rated for the load where it doesn't. Long rods get extra brackets so the rod can't bow. Drywall anchors chosen by guesswork are the single most common reason drapery ends up on the floor.
Because fabric remembers. Panels arrive folded, and those creases don't fall out on their own. We steam them on site, then dress the folds by hand and tie them loosely for several days so the cloth learns the shape. Untie them after that and each fold sits where it should. Skipping this step is why some drapery hangs with a stiff wave in the wrong place for years. It costs us an hour and it's the difference between finished and installed.
You can get blackout lining, and it's worth knowing what that does and doesn't do. The lining stops light coming through the cloth, so the panel itself goes dark. Light still enters around the panel: over the top, past the return if there isn't one, and through the gap at the center if the overlap is short. The reliable way to darken a bedroom in New Palestine is blackout lined panels over a blackout shade with side channels. The drapery handles the softness and the shade handles the edges.
Rings on a decorative rod look better and are drawn by hand or with a baton. They suit panels that mostly stay open and get closed occasionally. A traverse rod has carriers and a mechanical draw, so panels that get closed every single night operate more smoothly and the fabric takes less handling. Ripplefold on a track is the third option and stacks tightest. We ask how often the panels actually move, then pick hardware that matches that answer.
More than most people plan for. Open panels have to go somewhere, and that stack is real: full fullness, multiple widths and a lining add up to a bundle of cloth several inches deep per width. If the rod stops at the edge of the opening, your open panels cover a chunk of the glass all day. We extend the rod past the trim on both sides so the stack lands on wall, which makes the window look larger and lets the daylight in.
Vacuum the face with a brush attachment a few times a year and steam out wrinkles rather than pressing them. When it needs more, use a dry cleaner who handles drapery specifically and takes panels down and rehangs them. Do not wash lined or interlined panels at home. The layers shrink at different rates and the hem goes wavy in a way that can't be fixed. Sun exposure ages fabric faster than dirt does, which is why we spec lining even on panels you'll never close.
Sometimes, and you should assume not. Fabric runs in dye lots, and a bolt woven next year can sit slightly off the one your panels came from. Two panels from different lots on the same wall will show it in daylight. If a second phase is coming, the right move is buying the yardage now, even if the sewing happens later. We'll record the fabric, the lot and the widths on your file either way, which at least gives the reorder a fighting chance.
Layering does more, and it's how most rooms end up. The shade handles the working part: glare, privacy and the edges of the window. The drapery handles softness, height and the way the room feels, and it stops a wall of hard treatments looking like an office. In a New Palestine bedroom that combination gives you darkness the drapery alone can't deliver. In a living room, stationary panels beside a solar shade can be the whole job.
Areas We Serve

Custom Drapery Across New Palestine

We measure and install in every one of these New Palestine neighborhoods. Each has its own page with the build eras, window conditions and mounting notes for that section.

Related Services

Other Window Treatment Services in New Palestine

New Palestine Window Treatments handles the full scope of window treatment work. Explore our other services below.

Faux Wood Blinds in New Palestine

Moisture proof slats for New Palestine wet rooms and wide openings

Learn more →

Wood Blinds in New Palestine

Stained hardwood slats matched to real casing, not drywall returns

Learn more →

Vertical Blinds in New Palestine

Vane coverage for the door walls in New Palestine's newest plans

Learn more →
Free In-Home Measure

Schedule Your Free In-Home Measure in New Palestine

Contact Information

Reach Us Directly

Our team prioritizes scheduled measures and service calls, and books in-home measures during business hours.

Office
1417 Commerce Avenue, Indianapolis, IN 46201
Hours
Mon-Fri 8a-6p
Service Area
New Palestine, IN and Surrounding Areas

Ready to Book Your Measure?

Call us to set up an in-home measure, or to ask about a treatment that has stopped working. We will talk it through on the phone first.

Call (317) 854-7158
Service area

Serving New Palestine and the surrounding area

Call NowGet Quote